2. Use of process equipment are all conventional equipment, easy to maintain.
3. Process layout of reasonably compact, smaller investment.
4. The production of products, excellent performance, high mechanical strength, low thermal conductivity. A wide range of applications.
5. The production processes of the waste can be broken into particles, re-used as raw materials.
Specific production process as follows:
1, ingredients
The project set up eight raw material silos (each effective volume: 6m3). Raw materials into the shop, by the LD-A3 electric single-girder crane raised to silo platform, dumping into the hopper. Silo bottom 2 sets 1000Kg measurement bucket, it can enter the material ratio, automatic weighing and good raw material, and the unloading of raw materials into the screw conveyor in the bottom of the TU219.
TU219 good screw conveyor then said screw conveyor of raw materials into the TU219.
2, mixed
Mixed with 2 sets of XLH-750 Planetary Mixer mandatory. Mixer is intermittent work, mixed approximately 15-20 minutes each time, even in the mixing process by adding an appropriate amount of water, to facilitate molding.
3, forming
Forming use 6 sets J53-100A friction press. The press easy to operate, suitable for production of lightweight brick.
Forming a good brick, after inspection, put drying cars, waiting to enter the drying kiln drying.
4, dry
Light clay brick dry slower, so I chose to select the 60m tunnel kilns. After a good drying brick seized after the election, into the tunnel kiln.
5, firing
The project kiln use 10,000 ton / year production line of high-temperature kiln brick tunnel kiln.
Good brick kiln drying plant for transport to the firing.
6, the prosecution elected, packaging
Cooked products, after careful inspection selection, packaging, you can sell or use. 3, forming
Forming use 6 sets J53-100A friction press. The press easy to operate, suitable for production of lightweight brick.
Forming a good brick, after inspection, put drying cars, waiting to enter the drying kiln drying.